Design for Additive Manufacturing
Although additive manufacturing is a relatively young discipline, the effects that can be achieved with the various additive technologies in terms of efficient product and manufacturing process optimization are of outstanding importance. These processes offer innovative and versatile opportunities f...
Saved in:
| Main Authors: | , , |
|---|---|
| Corporate Author: | |
| Format: | Electronic eBook |
| Language: | English |
| Published: |
Berlin, Heidelberg :
Springer Berlin Heidelberg : Imprint: Springer,
2024.
|
| Edition: | 1st ed. 2024. |
| Subjects: | |
| Online Access: | Full text (Wentworth users only) |
MARC
| LEADER | 00000nam a22000005i 4500 | ||
|---|---|---|---|
| 001 | 9826386c-149b-41b5-9244-0ce82e3de974 | ||
| 005 | 20240722000000.0 | ||
| 008 | 240223s2024 gw | s |||| 0|eng d | ||
| 020 | |a 9783662684634 |9 978-3-662-68463-4 | ||
| 024 | 7 | |a 10.1007/978-3-662-68463-4 |2 doi | |
| 035 | |a (DE-He213)978-3-662-68463-4 | ||
| 049 | |a WENN | ||
| 050 | 4 | |a TA174 | |
| 072 | 7 | |a TBD |2 bicssc | |
| 072 | 7 | |a TEC016000 |2 bisacsh | |
| 072 | 7 | |a TBD |2 thema | |
| 082 | 0 | 4 | |a 6,200,042 |2 23 |
| 100 | 1 | |a Lachmayer, Roland. |e author. |4 aut |4 http://id.loc.gov/vocabulary/relators/aut | |
| 245 | 1 | 0 | |a Design for Additive Manufacturing |h [electronic resource] / |c by Roland Lachmayer, Tobias Ehlers, René Bastian Lippert. |
| 250 | |a 1st ed. 2024. | ||
| 264 | 1 | |a Berlin, Heidelberg : |b Springer Berlin Heidelberg : |b Imprint: Springer, |c 2024. | |
| 300 | |a XI, 257 p. 193 illus., 134 illus. in color. |b online resource. | ||
| 336 | |a text |b txt |2 rdacontent | ||
| 337 | |a computer |b c |2 rdamedia | ||
| 338 | |a online resource |b cr |2 rdacarrier | ||
| 347 | |a text file |b PDF |2 rda | ||
| 505 | 0 | |a Introduction -- Fundamentals -- Component selection -- Creative methods -- Restrictive methods -- Machine setup -- Validation and quality assurance -- Project examples -- Business models -- Is additive manufacturing worth it?. | |
| 520 | |a Although additive manufacturing is a relatively young discipline, the effects that can be achieved with the various additive technologies in terms of efficient product and manufacturing process optimization are of outstanding importance. These processes offer innovative and versatile opportunities for accelerated product design and advanced design and manufacturing process optimization. In addition, the use of nature-based technologies also makes it possible to manufacture components with extreme complexity and internal structures that were very difficult or impossible to produce using conventional methods. Lightweight design and energy savings, also in the product life cycle, can thus be realized with the same stability and load-bearing capacity. This book describes how the potential of additive manufacturing can be used specifically in product development to design highly efficient products. For this purpose, the contents are linked holistically in the sense of development processesof product creation. The Authors Univ.-Prof. Dr.-Ing. Roland Lachmayer is head of the Institute for Product Development at Leibniz Universität Hannover. He is a senator of Leibniz University, member of the scientific board of the Laser Zentrum Hannover e.V. and managing director of the Wissenschaftliche Gesellschaft für Produktentwicklung e.V. Since 2019, Prof. Lachmayer has headed the Additive Manufacturing working group of the Cluster of Excellence PhoenixD. Dr.-Ing. Tobias Ehlers is Group Leader for "Printed Effects" at the Institute for Product Development at Leibniz Universität Hannover. Current research activities are the design of dynamically loaded structural parts produced by additive manufacturing. Research focuses on structural optimisation of particle-damped structural components and multi-material manufacturing. Dr.-Ing. René Bastian Lippert is Group Leader for Mechatronic development at HiltiEntwicklungsgesellschaft mbH. Until 2021, he was responsible for the industrialization of additive manufacturing at Hilti AG. Before that, he led the group "Methods for Additive Manufacturing" at the Institute for Product Development at Leibniz Universität Hannover. | ||
| 650 | 0 | |a Engineering design. | |
| 650 | 0 | |a Manufactures. | |
| 650 | 0 | |a Industrial engineering. | |
| 650 | 0 | |a Production engineering. | |
| 700 | 1 | |a Ehlers, Tobias. |e author. |4 aut |4 http://id.loc.gov/vocabulary/relators/aut | |
| 700 | 1 | |a Lippert, René Bastian. |e author. |4 aut |4 http://id.loc.gov/vocabulary/relators/aut | |
| 710 | 2 | |a SpringerLink (Online service) | |
| 773 | 0 | |t Springer Nature eBook | |
| 776 | 0 | 8 | |i Printed edition: |z 9783662684627 |
| 776 | 0 | 8 | |i Printed edition: |z 9783662684641 |
| 856 | 4 | 0 | |t 0 |u https://ezproxywit.flo.org/login?url=https://doi.org/10.1007/978-3-662-68463-4 |y Full text (Wentworth users only) |
| 999 | 1 | 0 | |i 9826386c-149b-41b5-9244-0ce82e3de974 |l w3064807 |s US-MBWI |m design_for_additive_manufacturing_____________________________________elect2024____202sprina________________________________________lachmayer__roland__________________e |
| 999 | 1 | 1 | |l w3064807 |s ISIL:US-MBWI |i Wentworth |t BKS |a Ebooks |c Springer |d Other scheme |p UNLOANABLE |